Productos
La bomba de doble diafragma SaniForce 3150 3A está diseñada para cumplir con los requisitos de saneamiento más estrictos de la industria láctea.
La bomba sanitaria 3150 3A está montada en una plataforma, equipada con un detector de fugas y se la puede rotar 360º para drenar el exceso de productos químicos sanitarios.
Especificaciones:
| Maximum fluid working pressure |
8 bar, 0.8 MPa
|
| Air pressure operating range |
1.4–8 bar, 0.14–0.8 MPa
|
| Maximum air consumption |
5.0 m³/minute
|
| Air consumption at 70 psi, 60 gpm |
1.4 m³/minute
|
| Maximum free-flow delivery |
570 lpm
|
| Maximum pump speed |
145 cpm
|
| Gallons/liters per cycle* |
3.9 l
|
| Air inlet size |
0.5 in npt(f)
|
| Maximum suction lift | |
| Flapper |
3.5 m wet, 1.7 m dry
|
| Ball |
5.5 m wet, 2.7 m dry
|
| Maximum size pumpable solids | |
| Flapper |
63.5 mm
|
| Ball |
25.4 mm
|
| Noise Data** | |
| Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow |
90 dB(A)
|
| Sound power level |
103 dB(A)
|
| Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm |
85 dB(A)
|
| Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings | |
| PTFE |
104°C
|
| Santoprene® |
82°C
|
| Buna-N |
82°C
|
| Fluoroelastomer |
121°C
|
| 3A Approved EPDM |
135°C
|
| Fluid inlet size |
2.0 in sanitary flange
|
| Fluid outlet size |
2.0 in sanitary flange
|
| Wetted Parts*** | |
| All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177. | |
| Wetted materials on all models |
316 stainless steel, 3A Approved EPDM
|
| Wetted materials depending on model |
Buna–N (Nitrile), Fluoroelastomer, 316 stainless steel, 3A Approved EPDM, PTFE, Santoprene
|
| CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15% | |
| Non-wetted external parts |
300 series stainless steel, polyester (labels), LDPE foam (gasket)
|
| Weight | |
| All Models |
66 kg
|
| Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1. *** The pump user must verify that the construction materials meet their specific application requirements. | |
| Marca | GRACO |
|---|---|
| Tipo | Completos |
| Sector | Industria |
| Línea | Procesos |
